Description
Yellow or transparent water-based varnish.
7,50 €
Water-based varnish available in yellow or transparent versions.
Yellow or transparent water-based varnish.
| Packaging | 125 ml |
|---|---|
| Color | Red, Transparent |
Water-based adhesive for gilding with imitation leaves on wood, gesso, or stucco in indoor environments. The product’s body allows for a consistent and even size base.
The red version is recommended for imitation gold and Copper leaf to achieve a warmer effect, while the transparent version is suitable for Aluminum leaf.

![]()
![]()
![]()
Composition
Red or transparent water-based varnish.
Method of use
The support to be treated must be perfectly clean and degreased.
Dilute the product 20-30% with turpentine and apply by brush in as thin layers as possible (recommended “Ambra” and “Perla” synthetic-hair brush series, p. 135).
Leaf can be applied 3 to 12 hours after application depending on format chosen. During drying protect the surface from dust.
Yield
10 -15 m² / litre
Storage
Store in a cool, dry place in its original container, away from direct sunlight and sources of heat. Ideal storage conditions are 15-25°C and lower than 50% humidity.
Additional information
Dilution percentage, application method and quantities applied may significantly affect the workability time. The most suitable application methods should be determined by experimentation on the basis of the surface being gilded and the desired result.
This item is not subject to any shipping restrictions.


Synthetic brush

To apply with a brush, powders and shells are the best formats for any retouching and for carved or highly irregular surfaces.

14 x 14 cm imitation leaves packaged in a single envelope of 25 leaves available in loose format. The respective barcode and the color of the leaf contained inside is represented on the external packaging.
Sibírska 61
831 02, Bratislava
Company ID: 52 299 392
Tax ID: 2121016942
VAT ID: SK2121016942

Aging – Patina finish